Audison Thesis TH quattro Specifications download pdf (Page 41)

Digital domain

ADVANCED MANUAL / TH quattro

DOWN

ENTER

B channelA channel

ASC - Amplifier Status Controller

Setup Amplifier: Amp ID on 4 Ch Mode

AMP ID stands for Amplifier IDentification. The AMP ID is a way to identify the task the amplifier performs inside

the system. The AMP ID does not affect the electric functioning and does not act on the amplifier electronic

crossover. The AMP ID is fundamental to adjust Volume, Balance, Fader as well as Sub Volume when the DRC

is connected. The ASC recognises the function the amplifier has been given through the ID. By acting on the

DRC and adjusting Volume, Balance, Fader as well as Sub Volume, as a consequence also the signal to the

amplifiers will be managed.

Example:

If the AMP ID-Front is assigned to the TH amplifier, by operating on the DRC its general volume, as well as the

right/left balance, will change. Also, by setting the Fader on Rear you will hear the volume diminishing;

however, no change will be perceived if you operate on the DRC Sub volume.

Vice versa, if the AMP ID – Subwoofer is assigned to the TH amplifier, by operating on the DRC its general

volume, more specifically the Sub volume, will change; however, no change will be perceived if you operate on

the right/left balance or moving the Fader.

In order to avoid errors, you should assign the ID according to the speakers connected to the amplifier.

Default Entries

PRESS ENTER TO

CONFIRM YOUR

SELECTION AND

MOVE TO THE

NEXT SETUP

PRESS

ENTER TO

REACH

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 70 71

No comments

Audison Thesis TH quattro Specifications Page 41