Audison Thesis TH quattro Specifications download pdf (Page 63)

Digital domain

ADVANCED MANUAL / ACNet

Amplifier Setting: Inputs

As for the ASC Setup Amplifier, it is necessary to set the system whenever wanting to use the digital input.

In this area it is necessary to select the Main Signal Input for each amplifier connected to the system

Example:

- If the amplifier being set is the first of the network to receive the signal from an external source, it is

necessary to specify if it is an analog or digital one, by selecting Analog or Optical Master.

- If it is connected to both an analog and a digital source, select Optical Master and manage the sources

switch through the DRC.

- If the amplifier being set receives the signal from another TH amp, connected in analog and digital AD Link,

select Optical Slave .

- If the amplifier being set receives the signal from an external audio processor (Ex: Audison Bit One) select

AD Link.

The note warns that if the DRC is not connected to the system, even selecting a digital input, when ACNet

software will be switched off, only the Analog Input will operate.

ACNet - Audison Control Network

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 69 70 71

No comments

Audison Thesis TH quattro Specifications Page 63