Audison bit Ten D Installation Guide

www.audison.euADVANCED MANUALRev. 1.1c

ADVANCED MANUAL / bit Ten D /101. SPEAKERS IN HI-LEVEL STEREO FRONT+REAR (see 8.1)* To disable the Speaker Turn on function on the Front Left channe

ADVANCED MANUAL / bit Ten D /115.5 LOW-LEVEL INPUT SIGNALSAUX IN L/R: Auxiliary analog stereo signal.Sensitivity is adjustable from 0.6 to 5 V RMS.5.

ADVANCED MANUAL / bit Ten D /125.7 CONNECTION WITH HANDS-FREE PHONE KITPHONE +/- Input compatible with the hands-free kit speaker output (see 4.2.3).

ADVANCED MANUAL / bit Ten D /132. OUTPUT TO PRE AMPLIFIER’S SYSTEM3. OUTPUT TO AN AMPLIFIERS SYSTEM PROVIDED WITH AD LINK AND AC LINK CONNECTIONS (T

ADVANCED MANUAL / bit Ten D /143. Turn on the device and play track 1 of the CD supplied with the bit Ten D.  •Setalltonecontrolstozero(flat)

ADVANCED MANUAL / bit Ten D /154. How to IN LEVEL calibrate the MASTER inputs. This procedure is delicate and requires particular attention. Imprope

ADVANCED MANUAL / bit Ten D /162. De-equalization analysis: setting the bit Ten D. •PushtheDE-EQSETbuttonandchecktheDE-EQCHECKLEDfollowi

ADVANCED MANUAL / bit Ten D /176.3 AMPLIFIERS SENSITIVITY CALIBRATION6.4 HOW TO CALIBRATE THE PHONE AND AUX IN INPUT SENSITIVITIESOnce the bit Ten D

ADVANCED MANUAL / bit Ten D /187.1 PC SOFTWARE INSTALLATION GUIDE7. bit Ten SOFTWARE AND DRIVERS INSTALLATION / UNINSTALLATION GUIDE71. Insert the “

ADVANCED MANUAL / bit Ten D /197. Windows XP: select; - Everyone if you have system administrator privileges, so that, once installed, the program

ADVANCED MANUAL / bit Ten D /2Index 1. PRODUCT DESCRIPTION - PRECAUTIONARY NOTES ...

ADVANCED MANUAL / bit Ten D /201. Turn the bit Ten D on.2. Connect the USB cable to the appropriate port on the bit Ten D and to an available USB sl

ADVANCED MANUAL / bit Ten D /21Procedure 1 To uninstall the bit Ten D PC software you can use the link listed on the following menu: Start / All Progr

ADVANCED MANUAL / bit Ten D /228. bit Ten D INSTALLATION GUIDE USING A PC.To configure the bit Ten D inputs, analog (PRE) and digital (AD Link + AC Li

ADVANCED MANUAL / bit Ten D /236. Select the inputs. Select among the auxiliary inputs, AUX, PHONE, OPTICAL those that will be used. You can chang

ADVANCED MANUAL / bit Ten D /248. Setting the source. - Turn on the system and play track 1 of the CD supplied with the bit Ten D. - Set all tone co

ADVANCED MANUAL / bit Ten D /259. How to calibrate the bit Ten D IN Level inputs. This procedure is delicate and requires particular attention. Impr

ADVANCED MANUAL / bit Ten D /2611. How to select passive crossovers for speaker groups. You can set if passive crossovers exist that manage speaker

ADVANCED MANUAL / bit Ten D /2716. Once analysis has completed, the following messages could be displayed: - Head unit is equalized: The head u

ADVANCED MANUAL / bit Ten D /2821. Software Startup. The settings selected during the guided procedure are transferred to the processor main m

ADVANCED MANUAL / bit Ten D /2923. How to calibrate the Phone and Aux Ininput sensitivity. Once the system is calibrated and fully working through

ADVANCED MANUAL / bit Ten D /3WARNING: 1. a PC provided with Windows XP, Windows Vista, Windows 7 or Windows 8 operating system, 1.5 GHz min

ADVANCED MANUAL / bit Ten D /30The following chapters detail the system adjustments and acoustic tuning features.WARNING: We recommend that you do not

ADVANCED MANUAL / bit Ten D /312. Save Setup: saves the entire bit Ten D configuration in a file (e.g. “bitTenConfig.dip”) that you can load again t

ADVANCED MANUAL / bit Ten D /32If you click on the Config tab, a drop-down menu appears listing the entries shown in the image on the right:1. I/O Co

ADVANCED MANUAL / bit Ten D /33The Selected Input window shows the source that is active while the bit Ten D is connected to the PC. You can select th

ADVANCED MANUAL / bit Ten D /34The bit Ten D has five crossover filters, one per each output channel. Each filter allows you to set the parameters of

ADVANCED MANUAL / bit Ten D /355. Cut-off frequencies - Hi-P Hz 10 ÷ 20000: filter High-Pass - Lo-P Hz 10 ÷ 20000: filter Low-PassIf you select th

ADVANCED MANUAL / bit Ten D /36This setting automatically calculates the time speaker sound takes to get to the listener’s ear (Fig.1). Preliminary

ADVANCED MANUAL / bit Ten D /37Example of setting the time delay (Fig.4):1. Choose the system listening point. To identify the listening point, choo

ADVANCED MANUAL / bit Ten D /38The bit Ten D software features a 31-band, ± 12 dB graphic equalizer for each system channel. In compliance with ISO re

ADVANCED MANUAL / bit Ten D /39This section details the output levels of the bit Ten D channels as displayed by the software. Please note the descript

ADVANCED MANUAL / bit Ten D /43. bit Ten D and DRC INSTALLATION External dimensionsHow to install the DRCMounting dimensionsDRCWARNING: do not use agg

ADVANCED MANUAL / bit Ten D /40 c- Set the desired output equalizations (see 8.12). d- Insert a CD with a highly dynamic track. e- Select the “Link

ADVANCED MANUAL / bit Ten D /419. TROUBLESHOOTING1. bit Ten D functioning problems - If, while tuning the system with a laptop PC, the bit Ten D sho

ADVANCED MANUAL / bit Ten D /422. Select Check for Updates; the internet browser installed in your PC will open and automatically search for the U

ADVANCED MANUAL / bit Ten D /437. Before starting the bit Ten D update, the software will present the following warnings: - do not disconnect the b

ADVANCED MANUAL / bit Ten D /44If, when launching the bit Ten D PC software the “bit Ten D Warning” window appears, you can choose between the followi

ADVANCED MANUAL / bit Ten D /4510. DRC - DIGITAL REMOTE CONTROLThe DRC is the bit Ten D remote control system. It is a microprocessor digital system t

ADVANCED MANUAL / bit Ten D /46The PHONE input can not be selected as a normal source because it activates exclusively when an external hands-free ph

ADVANCED MANUAL / bit Ten D /47Important Remark 1. The steps of this upgrade must be performed strictly FOLLOWING THE SEQUENCE here, exactly as per

ADVANCED MANUAL / bit Ten D /4811. bit Ten D ACCESSORIESThis kit is composed of a cable and adapter allowing 2 m / 78.74” additional extension of the

ADVANCED MANUAL / bit Ten D /4912. TECHNICAL SPECIFICATIONS POWER SUPPLY Voltage 11 ÷ 15 VDCIdling current 0.4 ASwitched off without DRC 2.5 mASw

ADVANCED MANUAL / bit Ten D /5 The bit Ten D comes with a 20 multipolar interface for input signals, power supply and various control connections.4.

ADVANCED MANUAL / bit Ten D /50

ADVANCED MANUAL / bit Ten D /61. AUX IN L - R; auxiliary low-level stereo input. The bit Ten D comes with an auxiliary stereo signal input to connec

ADVANCED MANUAL / bit Ten D /71. POWER SUPPLY. +BATT 12V: Positive connection terminal for car 12V power supply. -BATT: Power supply negative conne

ADVANCED MANUAL / bit Ten D /83. KEY MEM To turn the processor on and off when the vehicle ignition is turned on / off.Remark: This signal is memory

ADVANCED MANUAL / bit Ten D /9 WARNING: to power the device, use 1 mm2 (16 AWG) cables.5.1 POWER SUPPLY AND REMOTE TURN ONRemark: the bit T