Audison bit Ten D Installation Guide download pdf (Page 12)

ADVANCED MANUAL / bit Ten D /

5.7 CONNECTION WITH HANDS-FREE PHONE KIT

PHONE +/- Input compatible with the hands-free kit speaker

output

(see 4.2.3).

Sensitivity adjustable from 2 to 15 V RMS.

PHONE MUTE: bit Ten D ON. This gives priority to

the phone conversation, allowing you to resume audio

reproduction when the phone call is finished.

PHONE MUTE: bit Ten D OFF. This turns the bit Ten D on.

When a phone call is received, the ring tone is audible after

around 5 seconds. Once the phone call is finished, the bit Ten

D turns off.

Nota: The PHONE MUTE terminal can be used to enable

the AUX IN, OPTICAL IN input

(see 8.6.5). In this case

the user won’t be able to interface with the hands-free kit

through the bit Ten D.

Pink: PHONE +

Orange: PHONE MUTE

Pink: PHONE -

01234...

CALL

AD Link

AC Link

5.8 OUTPUT SIGNALS

1. DIGITAL OUTPUTS TO AN AMPLIFIERS SYSTEM PROVIDED WITH AD LINK AND AC LINK CONNECTIONS

(Thesis TH, Voce AV) (vedi 8.1.12).

Remark: the output channels are 8 in total. The sum of the channels of the amplifiers connected must not exceed 8.

To increase the number of channels, however, the same function (AMP ID) can be assigned to more than one amplifier

(amplifiers working with same signal). To set up the amplifiers connected with this configuration, carefully read the

amplifiers’ Advanced Manual.

AD Link

AC Link

AV - TH AV - TH

Other AV / TH

Amplifiers

AV - TH

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

No comments

Audison bit Ten D Installation Guide Page 12