ADVANCED MANUAL / bit Ten D /
3
WARNING: 1. a PC provided with Windows XP, Windows Vista, Windows 7 or Windows 8 operating system,
1.5 GHz minimum processor speed, 1 GB RAM minimum memory and a graphics card with a minimum
resolution of 1024 x 600 pixels are required to install the software and setup the .
2. Before connecting your bit Ten D, carefully read this manual. Improper connections may cause damage to
the bit Ten D or to the speakers in the car audio system.
1. PRODUCT DESCRIPTION / PRECAUTIONARY NOTES
The bit Ten D is a digital signal processor essential to maximize the acoustic performance of your car audio system.
It consists of a 32-bit DSP processor and 24-bit AD and DA converters.
It can connect to any factory system, even in vehicles featuring an integrated audio processor, since, thanks to the
de-equalization function, the bit Ten D will send back a linear signal.
It features 8 signal inputs: 4 Hi-Level, 1 Aux Stereo, 1 Phone, 1 S/PDIF optical digital. It provides 5 PRE OUT analog
and 8 digital outputs.
Each output channel has a 31-band equalizer available. It also features a 66-frequency electronic crossover as well as
BUTTERWORTH or LINKWITZ filters with 6-24 dB slopes and a digital time delay line. The user can select adjustments
that allow him or her to interact with the bit Ten D through a remote control device called DRC.
2. PACKAGING CONTENTS
1/2
- bit Ten D - Signal Interface Processor
- DRC (Digital Remote Control) control panel
- 2 fixing brackets with 2.9 x 6.5 mm / 0,11” x 0,25”
self-tapping, cross-head screws
- 4.5 m / 177.16” DRC - AC Link cable
- 4 of 4.2 x 20 mm / 0,16” x 0,78”
self-tapping, cross-head fixing screws
- CD ROM with:
bit Ten D
Software
This advanced manual (.pdf format)
Test tracks
- Quick start guide
- Warranty
1.1
1.1a
1.1a
1.1
- 3.0 m / 9,84 ft USB cable
- Power supply cable / Remote / Inputs
- 5.0 m / 16,40 ft AD Link (LAN class 5S - RJ45) cable
- 5.0 m / 16,40 ft AC Link (RJ-12) cable
Comments to this Manuals